Operations Setting the source to be played ef d c b ij BROWSE PC 1 Press [u] C to turn this unit’s power off, then wait at least 1 minute. Never forcibly eject a disc directly after turning off the set’s power. Doing so is dangerous for the reasons described below. ! The disc will still be spinning when ejected and could hit your fingers, etc., causing injury. ! Also, the disc clamp will rotate in an unstable way, and the disc could get scratched. k TAG LIST l INFO m n UTILITY MENU o BACK TAG TRACK /REMOVE p STANDBY DISC EJECT USB STOP USB r AUTO CUE DISC 1 /16 1 TIME MODE 1/8 2 VINYL SPEED ADJUST 2 Use the included disc force eject pin. (Do not use anything else.) The included disc force eject pin is mounted on the CDJ-850’s bottom panel. When the pin is inserted all the way into the insertion hole, the disc is ejected 5 mm to 10 mm out of the disc insertion slot. Grasp the disc with your fingers and pull it out. I J C Loading USB devices Connect the USB device to the USB device insertion slot d. The USB indicator lights. Loading discs ! ! ! ! ! Set the disc with the printed side facing up. Insert the disc horizontally into the disc insertion slot in the main unit’s front panel. Do not load more than 1 disc. Do not force discs into the set’s disc insertion slot when the set’s power is off. Doing so could damage the disc or the set. When the disc is being drawn in or ejected, do not apply any force to the disc in the direction opposite its movement. Doing so could damage the disc or the set. Removing USB devices from the set ! Be sure to follow the procedure below when removing USB devices from the set. Removing a USB device without following this procedure could erase the set’s management data and make it impossible to read the USB device. When turning the set’s power off, be sure to remove the USB device first. ! 1 2 Press [u] C. Load the disc in the disc insertion slot I. Turn on the power of this unit. Playback starts. ! When auto cue is turned on, playback starts when [PLAY/PAUSEf] is pressed. For details on the auto cue function, see Setting auto cue on page 20. 1 2 Press [USB STOP] b for at least 2 seconds. Disconnect the USB device. The USB indicator turns off. Using the [BROWSE] button When [BROWSE] is pressed, the contents of the medium loaded in this unit are displayed on the information display section. Ejecting discs Press [h DISC EJECT] r. The disc is ejected from the disc insertion slot. ! If [DISC EJECT h] is pressed accidentally, press [PLAY/PAUSEf] immediately to return to the status directly before [DISC EJECT h] was pressed. (No sound is output during this time.) Browsing libraries and folders This displays the loaded tracks, sorted in category or tree structure. The display on the information display section differs according to whether or not library information is recorded on the USB device. — With library information d Library browsing: The music files are displayed by the categories set in rekordbox (album, artist, etc.). The category types can be changed in the Preferences (environmental settings) in rekordbox. — Without library information d Folder browsing: The folders/tracks on the medium are displayed with a tree structure. Contents recorded on discs cannot be viewed in the library browse mode. 1 2 About ejecting discs by force ! If the disc is not ejected when [DISC EJECT h] is pressed, the disc can be ejected forcibly by inserting the disc force eject pin into the disc force eject pin insertion hole on the main unit’s front panel. When forcibly ejecting a disc, be sure to do so following the procedure below. ! Title 01 Title 02 Title 03 16 En
Download PDF file