Using external inputs This unit is equipped with four sets of external inputs for connecting CD players, analog turntables, etc. The 4-channel mixer of this unit can be used to mix input sound without passing through a computer. Notes ! For details on the respective items, see Connections (p.14) and Part names and functions (p.5). ! The functions of rekordbox dj cannot be used for external input. ! The values adjusted with the various controls for rekordbox dj differ from the values adjusted with the various controls for external input. Mixing the sound of a DJ player, etc. 1 Connect a DJ player or other line level output device to the [LINE] input terminal or the [LINE/PHONO] input terminal. 2 Set the [LINE/PHONO] switch on the rear panel of this unit to [LINE]. 3 Set the [USB A, LINE, USB B] selector switch or the [USB A, PHONO/LINE, USB B] selector switch on the top panel of this unit to [LINE] or [PHONO/LINE]. 4 Adjust the level of sound output from each channel with the [TRIM] control and channel fader. Mixing the sound of an analog turntable, etc. 1 Connect an analog player or other phono level (for MM cartridges) output device to the [LINE/PHONO] input terminals of CH3 or CH4. ! CH1 and CH2 are input terminals for [LINE] only. ! Connect the ground wire of an analog player to the [SIGNAL GND] terminal of this unit. 2 Set the [LINE/PHONO] switch on the rear panel of this unit to [PHONO]. 3 Set the [USB A, PHONO/LINE, USB B] switch on the top panel of this unit to [PHONO/LINE]. 4 Adjust the level of sound output from each channel with the [TRIM] control and channel fader. Using SOUND COLOR FX with external input The four SOUND COLOR FX SELECT types use the unit can be used with external input. For how to use SOUND COLOR FX SELECT, see Using the SOUND COLOR FX function (p.24). The volume when the NOISE effect is used depends on the [TRIM] control of each channel. En 25 Advanced operation
Download PDF file
Table of contents