Changing the settings Setting items of [Mixer] tab in [Controller] Mixer Mode setting Changes the mixer mode setting. = Switching the mixer mode (p.57) Fader Start setting Changes the fader start function setting. ! By default, this is enabled. When the [Activate the fader start when moving a channel fader or the cross fader while pressing the SHIFT button.] check box is selected, the function is enabled. Cross Fader Curve setting Switches the characteristics of the crossfader curve. ! The further the control is turned clockwise, the sharper the curve rises. ! The further the control is turned counterclockwise, the more gradually the curve rises. Cross Fader Cut Lag setting Adjust the length of the silent zone (cut lag) of both ends of the crossfader. Adjustment can be made from 0.5 mm to 5.7 mm in 0.1 mm increments. ! By default, the level is set to 1.0 mm. Output setting of the microphone to the booth monitor Changes whether or not the microphone sound is output from the booth channel. When the [Don’t output microphone sound to the Booth output.] check box is unselected, the microphone sound is output from the booth channel. When the check box is selected, the microphone sound is not output from the booth channel. 86
Download PDF file
Table of contents