Changing the settings ! Effect parameter 2 button lit: Crossfader starts without the sync mode set. (The sync function is not activated simultaneously when crossfader starting starts.) ! Effect parameter 3 button lit: Crossfader start function is disabled. Setting the master output’s attenuator level ! By default, 0 dB is set. Press a [HOT CUE] mode, [ROLL] mode or [SLICER] mode button on the left deck. ! [HOT CUE] mode button lit: 0 dB (no attenuation) ! [ROLL] mode button lit: –3 dB ! [SLICER] mode button lit: –6 dB Changing the slip mode flashing setting When the slip mode is on, the buttons that can be operated in the slip mode (jog wheel indicator, [AUTO LOOP] button, [PLAY/PAUSE ] button, etc.) flash. This setting can be used to disable the flashing of these buttons. ! By default, slip mode flashing is enabled. Press the [SLIP] button on the left deck. ! [SLIP] button lit: Slip mode flashing is enabled. ! [SLIP] button off: Slip mode flashing is disabled. Setting the [SLIP] button lit/flash operation By default, the [SLIP] button lights when the mode switches to the slip mode and flashes while playback is continuing in the background. With this setting, the [SLIP] button can be made to flash when Slip mode is started, regardless of whether or not normal playback continues while the original rhythm is maintained in the background. Press the [SLIP] button on the right deck. ! [SLIP] button lit: The [SLIP] button flashes upon entering slip mode. ! [SLIP] button off: The [SLIP] button lights upon entering slip mode and the [SLIP] button flashes while normal playback is continued while the original rhythm is maintained in the background. Changing the velocity curve setting of velocity sampler mode Set the velocity curve of velocity sampler mode. You can choose one of four velocity curves. ! By default, curve 3 is set. Press the [AUTO LOOP] button on the left deck. The velocity curve setting changes by each pressing the [AUTO LOOP] button. The currently set value is indicated by how the [LOOP 1/2X], [LOOP 2X], [LOOP IN] and [LOOP OUT] buttons light. Curve 1 MIDI code 4 BEAT Min. Max. Strength which performance pad is pressed Curve 2 MIDI code 4 BEAT Min. Max. Strength which performance pad is pressed Curve 3 MIDI code 4 BEAT Changing the demo mode setting On this unit, the demo mode is set if no operation is performed for 10 minutes under normal usage conditions. This demo mode can be changed. ! By default, demo mode starts when there is no operation for 10 minutes. ! When any control or button on this unit is operated while in the demo mode, the demo mode is canceled. Press the [AUTO LOOP] button on the right deck. The demo mode setting changes each time the [AUTO LOOP] button is pressed. The currently set value is indicated by how the [LOOP 1/2X], [LOOP 2X], [LOOP IN] and [LOOP OUT] buttons light. ! [LOOP 1/2X] button lights: Demo mode is disabled. ! [LOOP 2X] button lights: Demo mode starts when there is no operation for 1 minute. ! [LOOP IN] button lights: Demo mode starts when there is no operation for 5 minutes. ! [LOOP OUT] button lights: Demo mode starts when there is no operation for 10 minutes. Min. Max. Strength which performance pad is pressed Curve 4 MIDI code 4 BEAT Min. Max. Strength which performance pad is pressed En 33
Download PDF file
Table of contents