Operation For more information, refer to the Operating Instructions that is available on the Pioneer DJ support site. Playback This section describes basic track selection operations and how to switch the screen. Playing music files on media connected to this unit 1 Open the USB slot cover and connect a USB device. 2 Press a media button (either [USB1] or [USB2]). Tracks and folders on the connected USB device are displayed in a list. You can switch the device from which to display the contents to the main display. [USB1] button: Displays the contents of the USB device connected to the USB1 slot. [USB2] button: Displays the contents of the USB device connected to the USB2 slot. ! The rekordbox library is displayed if it is stored in the connected USB device. 3 Rotate the rotary selector. Move the cursor to select an item. ! Press the rotary selector to move to a lower level in the folder. Press the [BACK] button to return to the level above. ! When the [BACK] button is pressed for over 1 second or the medium button for the medium being browsed is pressed, the display moves to the topmost level. 4 Use the rotary selector to select the track you want to load. If the rotary selector is pressed while the cursor is placed over a track title, the track menu is displayed. 5 Press the [LOAD1, 2] button. The track is loaded into the specified deck of the unit and begins playing. ! When a track has been loaded while pausing, press the [f (PLAY/PAUSE)] button to start playback. ! When auto cue is turned on, the disc pauses at the audio start posi- tion. In this case, press the [f (PLAY/PAUSE)] to start playback. If the medium contains the rekordbox library The rekordbox library is displayed if it is stored in the connected USB device. ! Music files are displayed by categories (album, artist, etc.) set with rekordbox. Playing the rekordbox library on a computer or mobile device Music files are displayed by categories (album, artist, etc.) set with rekordbox. 1 Press the [rekordbox] button. The rekordbox library is displayed on the main display of this unit. ! Press the [USB] button to select a mobile device connected by USB. 2 Rotate the rotary selector. Move the cursor to select an item. 3 Use the rotary selector to select the track you want to load. If the rotary selector is pressed while the cursor is placed over a track title, the track menu is displayed. 4 Press the [LOAD1, 2] button. The track is loaded into the specified deck of the unit and begins playing. Outputting sound Check that the unit and the external devices are properly connected before outputting sound. = Connecting input/output terminals (p.12) Set the volume of the power amplifier or powered speakers connected to the [MASTER1] and [MASTER2] terminals to an appropriate level. Note that loud sound may be output if the volume is set too high. Outputting the sound of channel 1 [CH1] To output the sound of [CH 2] (channel 2), replace [CH1] with [CH 2], [DECK 1] with [DECK 2], [PHONO1] with [PHONO2], and [LINE1] with [LINE2] in the procedure below. 1 Switch the [DECK 1, LINE1, PHONO1] selector switch of [CH1]. Select the input source for [CH1] from the devices connected to this unit. — [DECK 1]: Selects rekordbox, MIDI, USB1, USB2. — [LINE1]: Selects the device connected to the [LINE1] terminals. — [PHONO1]: Selects the device connected to the [PHONO1] terminals. 2 Rotate the [TRIM] control in the [CH1] section clockwise. Adjust the level of sound input to the [CH1] terminal. The [CH1] level indicator lights when audio signals are properly input to [CH1]. Rotate the [TRIM] control to confirm that the orange indicator lights up at the highest volume for the track. Make sure that the red indicator does not light, or the sound may be distorted. 3 Move the [CH1] channel fader to the back side. The level of the sound output from [CH1] terminals is adjusted. 4 Set the [CROSS FADER CURVE THRU, , ] (the crossfader curve selector switch). Sets the curve characteristics of the crossfader. 5 Set the crossfader. Switch the channel whose sound is output from the speakers. — Left edge: The [CH1] sound is output. — Center position: The sound of [CH1] and [CH 2] is mixed and output. — Right edge: The [CH 2] sound is output. ! This operation is not necessary when the [CROSS FADER CURVE (THRU, , )] (crossfader curve selector switch) is set to [THRU]. 6 Rotate the [MASTER LEVEL] control clockwise. Sound is output from the speakers. The master level indicator lights. Rotate the [MASTER LEVEL] control to confirm that the orange indicator lights up at the highest volume for the track. ! Make sure that the master level indicator does not light, or the sound may be distorted. En 15 Operation
Download PDF file