Additional information Additional information Troubleshooting ! Improper operation is often mistaken for trouble or a malfunction that occurred in the device. If something is wrong with this unit, check the following issues, and also access the following Pioneer DJ support site and check [FAQ] for [XDJ-RX2]. pioneerdj.com/support/ Some problems occurs due to the connected components. If the problem cannot be resolved after checking the connected components, ask the service center or dealer for repairs. ! The unit may not operate properly due to static electricity or other external influences. If this happens, normal operation can be sometimes restored by removing the power cord after turning the power off, and turning the power back on after inserting the power cord into the power outlet. Power supply Problem The unit does not turn on. The indicators do not light up. The power suddenly turns off. Check Is the power cord properly connected? Is the [u] switch turned on? Is the auto standby function activated? (When auto standby is functioning, the [MASTER REC (WAKE UP)] button is lit in red.) Remedy Connect the power cord to an AC outlet. (page 12) Turn on the [u] switch. This unit is shipped with the auto standby function set to on. If you do not want to use the auto standby function, set [AUTO STANDBY] to [OFF] on the [UTILITY] screen. Audio output Problem Sound is not output, or sound is too small. Sound is distorted. Sound is not output, or the output sound is distorted or noisy. Microphone sound is not output or the volume is low. Sound is distorted when an analog player is connected to the [PHONO] terminals of this unit. Or, lighting of the channel level indicator does not change when the [TRIM] control is turned. Check Remedy Are the [DECK 1, LINE1, PHONO1] and [DECK 2, LINE2, PHONO2] selector switches set to the proper positions? Change the input source for the channel using the [DECK 1, LINE1, PHONO1] and [DECK 2, LINE2, PHONO2] selector switches. (page 1 5) Are the [TRIM] control, channel faders, crossfader Set the [TRIM] control, channel faders, crossfader and [MASTER LEVEL] control and [MASTER LEVEL] control set to the proper to the proper positions. (page 15) positions? Is the [MASTER LEVEL] control set to the proper position? Adjust the [MASTER LEVEL] control so that the master channel level indicator lights around [0 dB] at the peak level. Set [ATT.] of [MASTER OUT] on the [UTILITY] screen to [-6 dB] or [-12 dB]. Is the [TRIM] control set to the proper position? Adjust the [TRIM] control to confirm that the channel level indicator lights up in orange at the highest volume. (page 1 5) Is the level of sound input to the [MIC] terminal set Set the [MIC1, 2 LEVEL] control to the proper position. to an appropriate level? Is this unit placed near a TV? Turn the TV off, or place this unit farther away from the TV. Is the [MIC1, 2 LEVEL] control set to the proper position? Is the switch on this unit or the microphone turned off? Is an analog player with a built-in phono equalizer connected to this unit? Is an audio interface for computers connected between the analog player and this unit? Set the [MIC1, 2 LEVEL] control to the proper position. Turn the switch on. When using an analog player with a built-in phono equalizer, connect it to the [LINE] input terminals. (page 1 2) If the analog player with a built-in phono equalizer has a LINE, PHONO selector switch, set it to PHONO. If the audio interface for computers has a line level output, connect it to the [LINE] input terminals. (page 1 2) If the analog player has a LINE, PHONO selector switch, set it to PHONO. Display Problem Check Playing address is not displayed in the — remaining time display. The category is not displayed. The scale is not displayed. The enlarged waveform is not displayed. Is the rekordbox library information stored on the USB device? Is the USB device write-protected? Is the track over 15 minutes long? Is the track over 60 minutes long? Remedy Playing address may not be displayed for files recorded in VBR. This happens when it takes time for the unit to detect the length of the track and display the playing address. Use a USB device containing the library information that is exported from rekordbox to the device. Disable write-protection on the USB device to make it writable. The scale is not displayed for tracks whose playing time is over 15 minutes. The enlarged waveform is not displayed for tracks whose playing time is over 60 minutes. En 17
Download PDF file