o QUANTIZE (for deck) Displayed when the quantize function of the deck operation is on. Displayed in red when the quantize function is enabled, and in gray when the function is disabled. = Using the quantize function (p.31) p QUANTIZE BEAT VALUE Indicates the size of the beat of the quantize function. q Playing speed adjustment range display Indicates the range in which the playing speed can be adjusted with respect to the original playing speed recorded on the medium. r AUTO PLAY Lights up when the auto play mode is on in the [UTILITY] screen. = Auto-play mode (p.31) s ZOOM and GRID ADJUST mode display When the rotary selector is pressed for over 1 second, the mode switches between [ZOOM] mode and [GRID ADJUST] mode. ! [ZOOM] mode: Two waveforms can be simultaneously zoomed in on or out of when the rotary selector is turned. ! [GRID ADJUST] mode: The beat grid of the track loaded in the active deck can be adjusted when the rotary selector is turned. The beat grid can be adjusted using the [MENU (UTILITY)] button. — [RESET]: Resets the adjusted beat grid. — [SNAP GRID (CUE)]: Moves the first beat to the position of the currently set cue. — [SHIFT GRID]: Reflects the results adjusted by using pitch bend during SYNC on the beat grid. t Parameter display section (msec, BEAT) Displays the parameters specified for the individual effects. u BPM display section (for effects) When in auto mode, the automatically detected BPM value is displayed. The color of the characters turns green during manual input mode, and [TAP] is displayed. This displays the manually input BPM value. v QUANTIZE (for effects) Displayed when the quantize function of the beat effect is on. Displayed in red when the quantize function is enabled, and in gray when the function is disabled. = Using the quantize function (p.31) w Channel select display section The name of the channel to which the effect is applied is displayed. x Effect display section The name of the selected effect is displayed. = Using the beat effect function (p.28) Jog dial display section 1 2 Jog touch detection display When jog mode is set to vinyl mode, the top of the jog dial lights up when pressed. Setting auto cue When a track is loaded or the track search operation is performed, the silent section at the beginning of the track is skipped and the cue point is automatically set at the point immediately before the sound starts. Press the [TIME MODE (AUTO CUE)] button for over 1 second. Auto cue is set to on. [A. CUE] is displayed on the main unit display. ! When the [TIME MODE (AUTO CUE)] button is pressed again for over 1 second, auto cue is set to off. ! The auto cue level setting remains in the memory, even when the power is turned off. ! When the [TIME MODE (AUTO CUE)] button is pressed for over 1 second while pressing the [SHIFT] button, switching auto cue on/off is possible only for the deck for which the [SHIFT] button is pressed. Changing the auto cue level The cue point to be set as the auto cue can be selected using one of the methods below. Setting the cue point by the acoustic pressure level identified as a silent section (8 levels) –36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB Automatically setting stored cues as cue points MEMORY: The stored cue point nearest the beginning of the track is set as the cue point for auto cueing. ! When [MEMORY] is set, [A. CUE] lights up in white on the main unit display. ! The auto cue level setting remains in the memory, even when the power is turned off. 1 Press the [MENU (UTILITY)] button for over 1 second. The [UTILITY] screen is displayed. 2 Turn the rotary selector, then press it. Select [AUTO CUE LEVEL]. 3 Turn the rotary selector, then press it. The auto cue level setting changes. Browsing tracks You can browse the connected devices and the library on the connected computer to display the tracks in a list on this unit. ! When a USB device that does not contain the rekordbox library infor- mation is browsed, the folders and tracks (music files) are displayed in a list with a tree structure. 2 1 Operation display Displays a playback position. The light goes around the circle on the button in 1.8 seconds. It turns during playback and stops in pause mode. Switching to the browse screen Press the device button that corresponds to the device whose contents you want to display. When a button is pressed, the contents of the corresponding source are displayed in a list. ! When the browse screen is displayed, the [BROWSE] button lights up. ! When the [BROWSE] button is pressed while the browse screen is displayed, the browse screen closes and the screen returns to the normal playback screen. When the [BROWSE] button is pressed again, the previous browse screen opens. 22 En
Download PDF file
Table of contents