Page number 6
Operation Turning the power on 1 Make all the connections, then plug the power cord into a power outlet. = Connections (p.5) 2 Press the [ u ] switch. This unit’s indicators light and the power turns on. Inserting discs ! This unit is a one-disc player. Do not insert multiple disc. ! Do not force discs into the disc insertion slot when this unit’s power is off. Doing so could damage the disc and lead to malfunction of this unit. ! When the disc is being drawn in or ejected, do not apply any force to the disc in the direction opposite its movement. Doing so could damage the disc or this unit. 1 Press the [ u ] switch to turn this unit’s power on. 2 Insert the disc horizontally into the disc insertion slot, with the printed surface facing up. Playback starts after the medium’s information has been read. ! When a disc containing music files recorded with a hierarchical structure is loaded, playback starts from the tracks in the uppermost layer. ! When auto cue is turned on, the disc pauses at the audio start posi- tion. In this case, press the [ PLAY/PAUSE f ] to start playback. = For details on the auto cue function, see this product’s operating instructions. ! When a USB device that has previously been connected to this unit or a to Pioneer DJ player is connected and a disc is inserted, the number of discs for which disc information is stored is displayed for several seconds on the main unit display. ! Press the rotary selector to move to a lower level in the folder. Press the [ BACK ] button to return to the level above. ! When the [ BACK ] button is pressed for over 1 second or the medium button for the medium being browsed is pressed, the display moves to the topmost level. ! Tracks in the currently playing track’s category/folder of can also be selected using the [ TRACK SEARCH o , p ] buttons. 4 Select the track and press the rotary selector. When the track is loaded, the screen switches to the normal playback screen. The medium on which the track is loaded flashes. = For details on the normal playback screen, see this product’s operating instructions. ! When [ EJECT/LOAD LOCK ] on the [ UTILITY ] menu is set to [ LOCK ], it is not possible to load other tracks during playback. Either set [ EJECT/LOAD LOCK ] to [ UNLOCK ] or press the [ PLAY/PAUSE f ] button to pause, then load the track. ! When a track has been loaded while pausing, press the [ PLAY/PAUSE f ] button to start playback. ! When auto cue is turned on, the disc pauses at the audio start posi- tion. In this case, press the [ PLAY/PAUSE f ] to start playback. = For details on the auto cue function, see this product’s operating instructions. For other operations, see this product’s operating instructions on the CD-ROM. Connecting USB devices 1 Press the [ u ] switch to turn this unit’s power on. 2 Connect the USB device to the USB device insertion slot. Playing media connected to or inserted in this unit 1 Load the medium in this unit. = Inserting discs (p.6) = Connecting USB devices (p.6) 2 Press one of the medium buttons ([DISC] or [USB]). The tracks or folders are displayed on a list. The medium whose contents are displayed on the main unit display can be switched. [ DISC ] button: Displays the contents on the inserted disc. [ USB ] button: Displays the contents of the connected USB or mobile device. ! If the rekordbox library information was written on the USB device, the rekordbox library is displayed. = For instructions on browsing the rekordbox library, see this prod- uct’s operating instructions. 3 Turn the rotary selector. Move the cursor and select the item. 6 En
Page number 7
English Additional information Troubleshooting ! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. ! This unit may not operate properly due to such external causes as static electricity. If this happens, normal operation can sometimes be restored by turning the power off, waiting for the disc to stop completely, then turning the power back on. Problem Check Remedy Disc cannot be ejected. Is [ EJECT/LOAD LOCK ] set to [ LOCK ]? Press the [ PLAY/PAUSE f ] button to set the pause mode, then press the [ DISC EJECT h ] button. Set [ EJECT/LOAD LOCK ] at [ UTILITY ] to [ UNLOCK ], then press the [ DISC EJECT h ] button. — If the [ DISC EJECT h ] button does not work, insert the pin into the disc force eject hole to eject the disc. Playback does not start when disc is loaded. Is the disc or file playable? Is the auto cue function activated? See Usable media on page 4. Press [ AUTO CUE ] for at least 1 second to turn cancel the auto cue function. File cannot be played. Is the file copyright-protected (by DRM)? Copyright-protected files cannot be played. No sound is produced, or sound is distorted or noisy. Are you operating the connected DJ mixer properly? Check the operation of the DJ mixer. Is this unit placed near a TV? Turn the TV’s power off or install this unit and TV away from each other. Loud noise is produced or playback stops when a certain disc is played. Is the disc scratched? Is the disc dirty? Scratched discs may not play. Wipe the dirt off the disc. File information is not properly displayed. Is [ LANGUAGE ] properly set? Is the information recorded in a language not sup- ported by this unit? Set [ LANGUAGE ] to the proper language. When creating files using DJ software, etc., record the information in a language supported by this unit. Track search operation takes too long. Is the auto cue function activated? Track searching may take some time when there are long silent sections between tracks. — If track searching is not possible within 10 seconds, a cue point is set at the beginning of the track. Back cue function does not work. Is a cue point set? Set a cue point. Loop play function does not work. Are loop points set? Set loop points. Settings are not stored in the memory. Has the power been turned off directly after changing the setting? After changing settings, wait at least 10 seconds before turning the power off. USB device is not recognized. Is the USB device properly connected? Connect the device securely (all the way in). Is the USB device connected via a USB hub? USB hubs cannot be used. Is the USB device supported by this unit? This player only supports mass storage class devices. This player supports portable flash memory and digital audio playback devices. Is the file format supported by this unit? Check the file format of the connected USB device. For the file formats sup- ported by this unit, see About USB devices on page 4. — Turn the power off then back on. Cue points or loops are not stored on a USB device. Are you trying to store more points than the limit? A maximum of 100 cue or loop points can be stored on USB devices per disc. For mediums other than discs, a maximum of 10 points can be stored per track. If you try to store more points than the limit, [ CUE/LOOPPOINT FULL ] is dis- played and the points cannot be stored. In this case, delete some points before storing new ones. Is the USB device write-protected? If the USB device is write-protected, [ USB FULL ] is displayed and the points cannot be stored. Disable the write-protection then store the cue or loop points again. Is there sufficient free space on the USB device? If there is not enough free space on the USB device, [ USB FULL ] is displayed and the points cannot be stored. Free up some space then store the cue or loop points again. Cue or loop points of tracks recorded on USB devices are not displayed. Was the USB device properly stopped before it was disconnected the last time? Points may not be displayed if the SD memory card/USB device is removed without performing the proper stopping procedure or if this unit’s power is turned off. Check that the USB indicator has turned completely off before disconnecting the USB device and turning this unit’s power off. Playback does not start immediately after pressing the button to reloop or play in reverse. Is the quantize function on? When the quantize function is on, playback starts from the nearest beat position at the time the button is pressed. If you want the operation to be performed the instant the button is pressed, turn the quantize function off. The playing address display is not — displayed in the remaining time mode. When playing files recorded in VBR, it may happen that the set cannot detect the length of the track immediately and that some time is required for the playing address display to appear. Time is required to read USB devices Is there a large number of folders or files recorded When there are many folders or files, some time may be required for loading. (flash memory drives and hard discs). on the USB device? Are files other than music files stored on the USB device? When files other than music files are stored in folders, time is required to read them as well. Do not store files or folders other than music files on the USB device. En 7







