Playing tracks and outputting the sound The following describes the procedure for outputting the sound of the left deck as an example. ! Set the volume of the device connected to the [MASTER OUT] terminals (power amplifier, powered speakers, etc.) to an appropriate level. Note that the output sound may be loud if the volume is set too high. Monitoring sound with headphones 1 Set the positions of the controls, etc., as shown below. Names of controls, etc. HEADPHONES VOL control Position Turned fully counterclockwise Mixer section 2 Press the [HEADPHONES SELECT A] button. 3 Turn the [HEADPHONES VOL] control. Adjust the sound level output from the headphones to an appropriate level. 3 4 6 5 9 Inputting the sound of the microphone The sound of the microphone connected to the [MIC] terminal can be mixed. 1 Connect the microphone to the [MIC] terminal. 2 Adjust the audio level input to the [MIC] terminal. ! ! ! Turn the [MIC VOL] control: The [MIC] terminal’s input audio level is adjusted. Only the volume of the microphone’s sound can be adjusted. The sound of the microphone is not output from the headphones. 7 8 3 MIC VOL control 4 EQ (HI, MID, LOW) controls 5 HEADPHONES VOL control 6 HEADPHONES SELECT A button 7 Channel fader 8 Crossfader 9 MASTER VOL control 1 Set the positions of the controls, etc., as shown below. Names of controls, etc. EQ (HI, MID, LOW) controls Channel fader Crossfader MASTER VOL control Quitting the system 1 Quit djay 2 for iPad/iPhone or vjay for iPad/iPhone. 2 Press the [STANDBY/ON] button until the unit enters standby. 3 Disconnect the iPhone/iPad connection cable from the iPhone or iPad. Note The software manuals of djay 2 for iPad/iPhone and vjay for iPad/iPhone can be downloaded from the algoriddim website. For details, see [Software Info] of [DDJ-WeGO3] on the Pioneer DJ support site below. http://pioneerdj.com/support/ Position Center Moved forward Left edge Turned fully counterclockwise 2 Press the play/pause button to play the track. 3 Move the channel fader away from you. 4 Turn the [MASTER VOL] control to adjust the audio level of the speakers. Adjust the audio level output from the [MASTER OUT] terminals to an appropriate level. 4 En
Download PDF file