Installation procedure (Mac OS X) 1 Insert the included CD-ROM into the computer’s CD drive. The [CD_menu] icon appears on the screen. Double-click it. 2 When the CD-ROM’s menu is displayed, select [Install VIRTUAL DJ LE(DDJ-WeGO)], then click [Start]. The VIRTUAL DJ LE installer is launched. 3 Once the VIRTUAL DJ LE installer is launched, click [Continue]. 4 Read the contents of the license agreement carefully, click [Continue] and then click [Agree] to accept the license agreement. If you do not agree to the license agreement, click [Disagree] to cancel installation. 5 Select the type of installation for VIRTUAL DJ LE, then click [Install]. — To select standard installation, click [Install]. — To install in a different location, click [Change Install Location.] and choose the place of installation. Installation begins. The installation completed screen appears once installation is completed. 6 Click [Close]. This completes the installation procedure. Checking the latest information on the VIRTUAL DJ LE software For the latest information on the operating environment and compatibility, and to acquire the latest operating system, please visit the following Atomix productions website: To obtain the latest version of the VIRTUAL DJ LE software, you must register your user account on the Atomix productions website. http://www.virtualdj.com Connecting the input/output terminals ON/OFF switch ! Connect this unit and the computer directly using the included USB cable. ! Connect the computer to which this unit is to be connected to an AC power supply. ! A USB hub cannot be used. Starting the system Starting this unit 1 Connect this unit to your computer via a USB cable. 2 Boot up the connected computer. 3 Slide this unit’s [ON/OFF] switch to the [ON] position. Launching VIRTUAL DJ LE When this unit has just started, wait for the illumination to stop before launching VIRTUAL DJ LE. Launching VIRTUAL DJ LE (Windows) 1 From the Windows [Start] menu, click the [All Programs] > [VirtualDJ] > [VirtualDJ LE (DDJ-WeGO)] icon. 2 Click [CONFIG] in the top right of the computer’s screen. The [Settings] screen appears. Settings should be selected on the [Sound Setup] tab in the following order: 1 [Inputs]: Select [NONE]. 2 [Sound card]: Select [ASIO DRIVER] and [Pioneer DDJ_WeGO ASIO]. 3 [Outputs]: Select [HEADPHONES] and [Master: Chan 1&2/Headphones: Chan 3&4]. ON OFF PHONES MASTER OUT MIC R R ɹɹɹL L For checking the output sound Headphones DJ software Computer For audio input Microphone For audio output Component, amplifier, powered speaker, etc. Be sure the power is off when connecting equipment and changing connections. Be sure to use the USB cable included with this product. Refer to the operating instructions for the component to be connected. With this unit, the power is supplied by USB bus power. The unit can be used simply by connecting it to a computer using the USB cable. 4 En 3 Click [Apply], then click [OK]. Launching VIRTUAL DJ LE (Mac OS X) 1 In Finder, open the [Application] folder, then doubleclick the [VirtualDJ LE] icon. When VIRTUAL DJ LE is launched the first time, a screen for entering the serial number appears. Input the serial number printed on this unit’s bottom panel (XXXXXXXX-XXXXX/WEGO), then click [OK].
Download PDF file