Changing the settings Changing the settings Setting preferences *: Default setting Setting items Setting items Level indicator MASTER OUT ATT. [CH1] top indicator flashes Setting value Setting value 0 dB* –6 dB –12 dB MIDI CH [CH1] 2nd from top indicator flashes 1* ~ 16 MIDI BUTTON TYPE [CH1] 3rd from top indicator flashes TOGGLE* TRIGGER PC UTILITY [CH1] 4th from top indicator ON flashes OFF* AUTO STANDBY FACTORY RESET [CH1] 5th from top indicator flashes [CH1] bottom indicator flashes ON* OFF RESET CANCEL VERSION [CLIP] indicator on [MASTER] flashes 1.0 or more Descriptions Level indicator [CH2] 0 dB or less turns on [CH2] -6 dB or less turns on [CH2] -12 dB or less turns on Set the attenuation level of the sound from [MASTER1] output terminals or [MASTER2] output terminals. MIDI channels 01 to 09 are shown by the number of [CH2] indicators turned on. MIDI channels 10 to 16 are shown by the Set the MIDI channel. top [MASTER] and up to 6 [CH2] indicators turned on. [CH2] orange indicators turn on [CH2] green indicators turn on Set how to transmit the MIDI signal. [CH2] orange indicators turn on [CH2] green indicators turn on Set whether to automatically launch the setting utility software of the computer when connecting the unit to the computer using a USB cable. [CH2] orange indicators turn on [CH2] green indicators turn on Turn the auto standby function on or off. [CH2] orange indicators turn on [CH2] green indicators turn on All settings are reset to their defaults. 1 digit: [CH1] 0.1 digit: [MASTER] It shows the firmware version. 0.01 digit: [CH2] Changing Procedures 1 While pressing the [FILTER] button, press the switch. The top [CH1] indicator flashes. 2 Press the [CUE] button for channel 1 to select the setting item. A different [CH1] indicator or [CLIP] indicator on [MASTER] flashes.* 3 Press the [CUE] button for channel 2 to select the setting value. For turning on the level indicators, the number of indicator or the color changes.* 4 Press the [FILTER] button to set the setting value. The level indicators fast flashes. 5 Press and hold the [FILTER] button for more than 1 second. The changing procedure is completed. * For flashing or lighting indicators, see “Setting preferences” above. About the auto standby function When [AUTO STANDBY] is set to [ON], the unit automatically enters the standby mode if 10 hours elapses with all of the following conditions met. — That none of this unit’s buttons or controls are operated. — That no audio signal is input to each channel of this unit. ! In the standby mode, the [STANDBY] indicator is lit. ! When the [FILTER] button is pressed, the standby mode is canceled. ! This unit is shipped with the auto standby function turned on. If you do not want to use the auto standby function, set [AUTO STANDBY] to [OFF]. En 19
Download PDF file