Changing the settings About the talk over function The talk over function has the two modes described below. — [ADVANCED] (advanced talk over): Only the mid-range sound of the sound of the channels other than the [MIC] channel is attenuated according to the [LEVEL] setting value and the output. dB Setting sound output from this unit to the computer Display the setting utility before starting. 1 Click the [MIXER OUTPUT] tab. Frequency — [NORMAL] (normal talk over): The sound of the channels other than the [MIC] channel is attenuated according to the [LEVEL] setting value and the output. dB Frequency Setting utility software The setting utility can be used to perform the checks and settings described below. — Checking the status of this unit’s input selector switches — Setting sound output from this unit to the computer — Adjusting the buffer size (when using Windows ASIO) — Checking the version of the firmware and driver software Displaying the setting utility For Windows Click [Start] menu > [All Programs] > [Pioneer] > [DJM-750MK2] > [DJM-750MK2 Settings Utility]. For Mac OS X Click [Macintosh HD] icon > [Application] > [Pioneer] > [DJM750MK2] > [DJM-750MK2 Settings Utility]. Checking the status of this unit’s input selector switches Display the setting utility before starting. Click the [MIXER INPUT] tab. 2 Click the [Mixer Audio Output] pull-down menu. Select the audio to be output to the computer from the audio signals of this unit. ! For details on the [Mixer Audio Output] pull-down menu list , see page 2 4 3 Click the [USB Output Level] pull-down menu. Adjust the volume of sound output from this unit. ! The [USB Output Level] setting is applied equally to all audio data. However, when 1 on the table in step 2 is selected, the sound is output at the same volume level as the sound input to this unit. ! If the volume is not loud enough after adjusting the volume of the DJ software, change the [USB Output Level] setting to adjust the volume of sound output from this unit. Note that the sound will be distorted if the volume is raised too high. ! [FX SEND] and [Control Tone] can be used with supported software. FX RETURN can be used with compatible software. En 23
Download PDF file
Table of contents