b EQ/ISO (HI, MID, LOW) controls (page 6) These adjust the sound quality of the respective channels. Basic Operation Outputting sound 1 Press [POWER] button. Turn on the power of this unit. c CUE button (page 6) Presses the [CUE] button(s) for the channel(s) you want to monitor. d Channel Fader (page 6) Adjusts the level of audio signals output in each channel. e CROSS FADER ASSIGN (A, THRU, B) selector switch (page 6) Sets the output destination of each channel to [A] or [B]. 2 Switch the input selector switches. Selects the input sources for the different channels from among the devices connected to this unit. — [PHONO]: Selects the analog player connected to the [PHONO] terminals. — [CD/LINE], [LINE]: Selects the DJ player or cassette deck connected to the [CD/LINE] or [LINE] terminals. — [USB */*]: Selects the sound of the computer connected to the [USB] port. f Crossfader (page 6) Outputs audio signals assigned by the crossfader assign switch corresponding to the curve characteristics selected by [CROSS FADER] (Crossfader Curve Selector Switch). g MASTER LEVEL control (page 6) Adjusts the audio level output from the [MASTER1] and [MASTER2] terminals. 3 Turn the [TRIM] control. Adjusts the level of audio signals input in each channel. The corresponding channel level indicator lights when audio signals are being properly input to that channel. h Master Level Indicator (page 6) Displays the audio level output from the [MASTER1] and [MASTER2] terminals. i MONO, STEREO selector switch (page 7) Switches the sound output from the [MASTER1] terminals, etc., between monaural and stereo. 4 Move the channel fader away from you. Adjusts the level of audio signals output in each channel. j BOOTH MONITOR control (page 7) Adjusts the level of audio signals output from the [BOOTH] terminal. 5 Switch the [CROSS FADER ASSIGN (A, THRU, B)] selector switch. Switches the output destination of each channel. — [A]: Assigns to [A] (left) of the crossfader. — [B]: Assigns to [B] (right) of the crossfader. — [THRU]: Selects this when you do not want to use the crossfader. (The signals do not pass through the crossfader.) k EQ CURVE (ISOLATOR, EQ) selector switch (page 6) Switches the function of the [EQ/ISO (HI, MID, LOW)] controls. l CH FADER ( , ) selector switch (page 7) , , ) selector switch (page 7) Switches the channel fader’s curve characteristics. 6 Set the crossfader. This operation is not necessary when the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [THRU]. m CROSS FADER ( n Main unit display This switches the crossfader curve characteristics. 7 Turn the [MASTER LEVEL] control. Audio signals are output from the [MASTER1] and [MASTER2] terminals. The master level indicator lights. Do not pull on the channel fader and crossfader knobs with excessive force. The knobs have a structure by which they cannot be pulled off easily. Pulling the knobs strongly may result in damaging the unit. Adjusting the sound quality Turn the [EQ/ISO (HI, MID, LOW)] controls for the respective channels. The adjustable ranges for the respective controls are as shown below. ! HI: –26 dB to +6 dB (13 kHz) ! MID: –26 dB to +6 dB (1 kHz) ! LOW: –26 dB to +6 dB (70 Hz) Switching the function of the [EQ/ISO (HI, MID, LOW)] controls Switch the [EQ CURVE (ISOLATOR, EQ)] selector switch. — [ISOLATOR]: Functions as an isolator. — [EQ]: The equalizer function is set. Monitoring sound with headphones 1 Connect headphones to the [PHONES] terminal. 2 Press the [CUE] button(s) for the channel(s) you want to monitor. 3 Switch the [MONO SPLIT, STEREO] selector switch. — [MONO SPLIT]: The sound of the channels for which the [CUE] button is pressed is output from the headphones output’s left channel, the [MASTER] channel sound is output from the right channel. — [STEREO]: The sound of the channels for which the [CUE] button is pressed is output from the headphones in stereo. 6 En
Download PDF file