Changing the settings ! For Setting preferences see page 20. About the talk over function The talk over function has the two modes described below. — [ADVANCED] (advanced talk over): The mid-range only of the sound of channels other than the [MIC] channel is attenuated according to the [LEVEL] setting value and output. dB Change Procedure 1 Press the [QUANTIZE (UTILITY, WAKE UP)] button for over 1 second. The [UTILITY] screen is displayed. 2 Press the [BEAT c, d] button. Select the setting item. 3 Press the [TAP] button. Detailed settings for the setting items are displayed here. Frequency 4 Press the [BEAT c, d] button. Select a detail setting. 5 Press the [TAP] button. The setting item’s setting value change screen is displayed. — [NORMAL] (normal talk over): The sound of channels other than the [MIC] channel is attenuated according to the [LEVEL] setting value and output. dB 6 Press the [BEAT c, d] button. Change the setting value. 7 Press the [TAP] button. Enter the setting value. The previous screen reappears. ! To return to the previous screen without changing the settings, press the [AUTO/TAP] button. Frequency 8 Press the [QUANTIZE (UTILITY, WAKE UP)] button. The [UTILITY] screen closes. About the setting utility software The setting utility can be used to make the checks and settings described below. — Checking the status of this unit’s input selector switches — Setting the audio data output from this unit to the computer — Adjusting the buffer size (when using Windows ASIO) — Checking the version of the firmware and driver software Setting items displayed with [ ] Setting the setting item [LOCK] to [OFF] allows you to change the item [ ]. ! Close the [UTILITY] screen to return [LOCK] to [ON]. Returning to default settings 1 While pressing the [QUANTIZE (UTILITY, WAKE UP)] buttons, press the [POWER] button. [FACTORY RESET] mode is displayed. Displaying the setting utility For Windows Click [Start] menu > [All Programs] > [Pioneer] > [DJM-900NXS2] > [DJM-900NXS2 Settings Utility]. For Mac OS X Click [Macintosh HD] icon > [Application] > [Pioneer] > [DJM900NXS2] > [DJM-900NXS2 Settings Utility]. 2 Press the [BEAT c, d] button. Select [YES]. 3 Press the [TAP] button. Enter the setting value. 4 Press [POWER] button. Turn off the power of this unit. Checking the status of this unit’s input selector switches Display the setting utility before starting. About the auto standby function When [AUTO STANDBY] is set to [ON], the unit automatically enters the standby mode if 10 hours elapses with all of the following conditions met. — That none of this unit’s buttons or controls are operated. — That no audio signal is input to each channel of this unit. — That no PRO DJ LINK connections are made. ! When the [QUANTIZE (UTILITY, WAKE UP)] button is pressed, the standby mode is canceled. ! This unit is shipped with the auto standby function turned on. If you do not want to use the auto standby function, set [AUTO STANDBY] to [OFF]. 18 En
Download PDF file