Connections and part names Connections Turn off this unit and disconnect the power cord from the power outlet before connecting components or changing the connections. Connect the power cord to a power outlet after all the connections are completed. Be sure to use the power cord, USB cable, and LAN cable included with this product. Refer to the operating instructions for the components to be connected. ! When using a LAN cable to connect the components, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable. ! Do not disconnect the LAN cable when information is being shared with PRO DJ LINK. ! A switching hub (commercially available) may be necessary depending on the models to be combined. Use a switching hub of 100 Mbps or greater. Correct operation may not be possible depending on the switching hub. ! A switching hub (commercially available) is necessary when connecting with a mixer that has only one LAN port. In the case of a mixer with enough LAN ports for all the DJ players and computers in the system, connect directly to a LAN port on the mixer’s rear panel without using a hub. System expansion When importing samples from a USB device When a USB device is inserted into the unit, the [PIONEER DJ SAMPLER] folder is created automatically. Only samples placed in the [Samples] folder in this [PIONEER DJ SAMPLER] folder can be read by the BROWSE function (p. 2 9). USB devices 4 En
Download PDF file
Table of contents