MIDI implementation chart The following describes the correspondence between the functions and MIDI messages when the unit receives MIDI messages to perform operations from an external MIDI device. Connections Connecting with DIN MIDI 1 Connect the MIDI OUT terminal of the external MIDI device and the MIDI IN terminal of this unit with a MIDI cable. 2 Tap [SYNC] in the HOME screen, etc. to display the SYNC screen. 3 Tap [DIN MIDI] or [DIN MIDI(THRU H/W)] in MIDI I/F SELECT. Connecting with USB MIDI 1 Connect your computer and the USB-B terminal of this unit with a USB cable. 2 Tap [SYNC] in the HOME screen, etc. to display the SYNC screen. 3 Tap [USB MIDI] in MIDI I/F SELECT. Setting whether or not to receive various MIDI messages Configure the settings for whether or not to receive various MIDI messages in the PROJECT SETTING (MIDI IN) category of the UTILITY screen. The setting items and setting values are as follows. Option settings Options CLOCK ENABLE/DISABLE ! ENABLE: Synchronizes the BPM of the sequence of the unit to MIDI CLOCK from the external MIDI device. ! DISABLE: Does not receive MIDI CLOCK from the external MIDI device. Option settings Options START/STOP/ CONTINUE ENABLE/DISABLE ! ENABLE: Synchronizes to sequence play/stop and other operations of the external MIDI device. ! DISABLE: Does not receive the START, STOP, and CONTINUE messages from the external MIDI device. Option settings Options NOTE/CC ENABLE/DISABLE ! ENABLE: Enables operation of the device in accordance with NOTE and CC (including Pitch Bend) from the external MIDI device. ! DISABLE: Does not receive the NOTE and CC (including Pitch Bend) messages from the external MIDI device. 1 In addition to the setting values, NOTE is received only when TRACK TYPE is SAMPLE. 1 In addition to the setting values, CC is received only when TRACK TYPE is SAMPLE or THRU. 52 En Option settings SONG POSITION Options ENABLE/DISABLE ! ENABLE: Determines the playback position from the song position pointer from the external MIDI device. ! DISABLE: Does not receive the song position pointer from the external MIDI device. Setting the MIDI IN channel Configure the MIDI IN channel setting in the PROJECT SETTING (MIDI IN) category of the UTILITY screen. The setting items and setting values are as follows. Option settings Options CHANNEL MAPPING None (The CH setting pop-up screen appears.) Any MIDI CH (CH.1 to CH.16) can be set for each track (TRACK1 to TRACK16). Set OFF for any track for which you do not wish to receive MIDI messages. ! The same MIDI CH cannot be set for multiple tracks. One MIDI CH can be set for only one track. Option settings Options CHANNEL MAPPING RESET None (Executes RESET.) The MIDI CH set in [CHANNEL MAPPING] is reset. When a reset is performed, the track number and MIDI CH are restored to the initial values of the same number. ! TRACK1 to TRACK16: CH.1 to CH.16 Notes Trigger the sample of each track. A sample is triggered no matter which MIDI channel. Function NOTE number TRACK1 trigger 0 TRACK2 trigger 1 TRACK3 trigger 2 TRACK4 trigger 3 TRACK5 trigger 4 TRACK6 trigger 5 TRACK7 trigger 6 TRACK8 trigger 7 TRACK9 trigger 8 TRACK10 trigger 9 TRACK11 trigger 10 TRACK12 trigger 11 TRACK13 trigger 12 TRACK14 trigger 13 TRACK15 trigger 14 TRACK16 trigger 15 The track corresponding to the MIDI channel set in [CHANNEL MAPPING] of UTILITY is triggered along with PITCH. When the TIME STRETCH setting of the track is [M.TMP], PITCH is restricted to the range of ±12. TIME STRETCH: OFF, RESMPL Function Sample trigger (PITCH: -24) Sample trigger (PITCH: -23) Sample trigger (PITCH: -22) Sample trigger (PITCH: -21) Sample trigger (PITCH: -20) NOTE number 24 25 26 27 28
Share
Print
Download PDF file
Table of contents
