PREVIEW button Automatically begins a preview when a sample is selected during browsing. The preview status can be switched by tapping. When ON: When the rotary selector is turned to move the focus, a selected sample plays once only. When OFF: Even if the rotary selector is turned to move the focus, samples are not played. ! The default is ON. ! If a sample is selected when this is switched from OFF to ON, it plays once only. ASSIGNED SAMPLE button Tapping this jumps to the location of the sound source assigned to that track. ! This is not displayed when [FILTER TYPE] is [TEXT]. Recording an external input sound and editing a source sound (SAMPLING/EDIT) An external or internal sound can be recorded, and the waveform of a sound source can be edited. 7 8 9 Adjusting track parameters (TRACK MENU) 1 2 3 1 SOURCE Selects the target for sampling. The target can be selected from [LINE IN] and [RESAMPLE]. ! This cannot be operated during recording. 2 REC THRESHOLD If the input signal exceeds this value during recording standby, recording begins automatically. ! This cannot be operated during recording. ! The default is OFF. ! OFF / -60 dB to -20 dB / PLAY 3 REC LENGTH Sets the length of time to continue recording from the start of recording. This is dependent on the BPM of the sequencer. When the specified length is reached, recording stops automatically. ! This cannot be operated during recording. ! The default is OFF. When OFF, recording stops automatically when 32 seconds are exceeded after the start of recording. ! OFF / 1 to 4 (BAR level) 4 SELECTION START Sets the start point of the selection range. ! This cannot be operated during recording. 5 SELECTION END Sets the end point of the selection range. ! This cannot be operated during recording. 6 MONITOR LEVEL Adjusts the volume for when monitoring during recording and editing. This can be set from 0 to 127. The default is 100, which does not change the balance (track volume, panning, headphone balance, etc.) set with the mixer, etc. The relative volume can be adjusted from here. ! This can also be operated during recording. 4 5 6 7 REC Starts input recording standby. Tapping this starts standby, and recording starts if the input signal exceeds [REC THRESHOLD]. ! When [REC THRESHOLD] is OFF, the state switches to recording (lit) the moment this is tapped. Not standby (off) Standing by (flashing) Recording (lit) If recording is performed in the state in which a sample is already assigned, the waveform is overwritten and the sample name at the top right becomes the [RECORDED TEMP.] indication. 8 SOFT LIMITER A limiter can be applied to the input sound. ! The default is OFF. En 33
Download PDF file
Table of contents