Before you start 4 Click [Allow] at the bottom right of the screen. 5 When this unit is connected to a Mac, disconnect the USB cable and then reconnect it again. Installation (for Windows) Do not connect this unit and the computer until the installation is completed. ! To install or uninstall the driver software, you need to be authorized by the administrator of your computer. Log on as the administrator of your computer before proceeding with the installation. ! Close all the applications running on the computer before installing the software. 1 Unzip the driver software for Windows (XDJRR####exe.zip) downloaded in Obtaining the driver software. #### indicates the driver software’s version. 2 Double-click the downloaded driver software (XDJ-RR_#.###.exe). The driver software installation screen appears. #.### indicates the driver software’s version. 3 When the language selection screen appears, select the language for the installation and then click [OK]. You can select the desired language from multiple languages according to the system environment of your computer. 4 Read the license agreement, select [Agree] if you agree to the terms, and click [OK]. If you do not agree to the license agreement, click [Cancel] to cancel the installation. 5 Complete the installation by following the instructions on the screen. If [Windows Security] appears on the screen while the installation is in progress, click [Install this driver software anyway] to continue the installation. ! When the installation is completed, a completion message appears. Connecting this unit and a computer 1 Connect this unit to your computer using a USB cable. 2 Press the [u] switch. This unit turns on. ! The message [Installing device driver software] may appear when the unit is first connected to a Windows computer, or when the unit is connected to a different USB port on the computer. Wait a while until the message [Your devices are ready for use] appears. Setting utility software The setting utility can be used to perform the checks and settings described below. — Adjusting the buffer size (when ASIO is used) — Checking the version of the driver software Displaying the setting utility For Mac Click the [Macintosh HD] icon > [Applications] > [Pioneer] > [XDJ-RR] > [XDJ-RR driver version display utility]. For Windows 10 Click [Pioneer] > [XDJ-RR Setting Utility] from the [Start] menu. For Windows 8.1 From [Apps view], click [Pioneer] > [XDJ-RR Setting Utility]. For Windows 7 Click [All Programs] > [Pioneer] > [XDJ-RR] > [XDJ-RR Setting Utility] from the Windows [Start] menu. Adjusting the buffer size (when ASIO is used) This function can only be used by those using a Windows operating system. This unit functions as an audio device conforming to the ASIO standards. ! If an application using this unit as the default audio device (DJ soft- ware, etc.) is running, quit the application before adjusting the buffer size. ! Display the setting utility before starting. % Click the [ASIO] tab. ! If the buffer size is made large, dropouts in the audio data (interruptions in the sound), etc., tend to occur less, but the time lag due to the transmission delay (latency) of the audio data may increase. Checking the version of the driver software ! Display the setting utility before starting. % Click the [About] tab. USB (LINK Export) connections driver software for rekordbox (Mac/ Windows) ! Dedicated driver software is required for connecting the unit and rekordbox (Mac/Windows) via USB (LINK Export). ! For the driver software, access the Pioneer DJ support site below and download the software. pioneerdj.com/support/ ! For information on installing the driver software, see the Pioneer DJ support site. En 7
Download PDF file