How to read this manual Thank you for choosing this speaker. To make sure you get the most from its functions and use them effectively, please read the Instruction manual and Precautions for Use carefully. Please keep the Instruction manual and Precautions for Use together with the Warranty. Main features 2000-W high output and high sound quality are achieved by mounting a D-class amplifier module in a wooden cabinet featuring outstanding acoustic characteristics. The XPRS2 can be used not only as a stationary sound system in a stationary facility but also as sound equipment for events as it can be easily transported and set up quickly. • System type: Multi-purpose, active loudspeaker with DSP controls • Transducer driver: 1-inch exit compression driver, 1.75-inch voice coil • Subwoofer: ferrite woofer, 3-inch (76 mm) voice coil with long excursion • Power rating: Class D 2000 W (peak) • 4 DSP modes: LIVE/MUSIC/SPEECH/MONITOR • Subwoofer: 80 Hz, 100 Hz, 120 Hz (NORMAL, BOOST, XTENDED) • Electronic protections: Thermal/overload/digital limiter/compressor • Power supply: 110 V – 240 V (50 Hz / 60 Hz) • Enclosure construction: Plywood cabinet, black paint, rubber feet, metal handle • Mounting: One metal standard pole-mount, 10 x M10 threaded inserts plus integrated pull-back cover Rear panel (full-range models) a 9 8 7 6 3 4 INPUT DSP DISPLAY DIGITAL SIGNAL PROCESSING MASTER VOL SIG MIC 1 OFF MAX MIC/LINE SIG HI-Z SIG SIG/LIMITER POWER 2 OFF MAX HI-Z/LINE 3 OFF STEREO MAX MIX OUT b c d 5 e 3 INPUT1 Level control for the LINE/MIC INPUT 1. INPUT Balanced input for sources such as mixing consoles, instruments, or microphones. Connections can be made via a 1/4-inch TRS or XLR connector. 4 INPUT2 Level control for the Hl-Z/LINE INPUT 2. INPUT Balanced input for sources such as mixing consoles, instruments, or microphones. Connections can be made using a 1/4-inch TRS or XLR connector. 5 STEREO LEVEL Line input level control for STEREO. 6 INPUT LEVEL Level control of the individual input. 7 Hl-Z signal light When sound from a guitar is input, the system setting changes to Hl-Z sensitivity and the signal light turns on. 8 MIC signal light When sound from a microphone is input, the light turns on when the system setting changes to MIC sensitivity. 9 SIG single channel signal light When there is a signal, the signal light turns on. a LCD DSP control and monitoring interface. b MASTER VOL Total volume adjustment range: -60 dB – +10 dB. DSP Scroll through the menus and choose from the options. Press the MASTER VOL knob to select an item on a menu. c SIG/LIMITER signal light Lights up green when there is a signal, and red when the amplifier starts to compress. d POWER indicators Llights up when the speaker is turned on. e MIX OUT The XLR output sends mixed input signals to other speakers or subwoofers. INPUT LEVEL controls the level of the signal sent to the MIX OUT. The MASTER VOL or DSP control settings do not affect the mixed output. 2 1 1 AC INPUT Connect the power cord to AC IN and then to the power outlet. 2 POWER AC switch for turning the power on or off. When POWER is turned ON, the POWER LED and the LCD screen both light up. 2 En
Download PDF file
Table of contents