Page number 2
How to read this manual Thank you for choosing this speaker. To make sure you get the most from its functions and use them effectively, please read the Instruction manual and Precautions for Use carefully. Please keep the Instruction manual and Precautions for Use together with the Warranty. Main features 2 000-W high output and high sound quality are achieved by mounting a D-class amplifier module in a wooden cabinet featuring outstanding acoustic characteristics. The XPRS2 can be used not only as a stationary sound system in a stationary facility but also as sound equipment for events as it can be easily transported and set up quickly. • System type: Multi-purpose, active loudspeaker with DSP controls • Transducer driver: 1-inch exit compression driver, 1.75-inch voice coil • Subwoofer: ferrite woofer, 3-inch (76 mm) voice coil with long excursion • Power rating: Class D 2 000 W (peak) • 4 DSP modes: LIVE/MUSIC/SPEECH/MONITOR • Subwoofer: 80 Hz, 100 Hz, 120 Hz (NORMAL, BOOST, EXTENDED) • Electronic protections: Thermal/overload/digital limiter/compressor • Power supply: AC 110 V – 240 V (50 Hz / 60 Hz) • Enclosure construction: Plywood cabinet, black paint, rubber feet, metal handle • Mounting: One metal standard pole-mount, 10 x M10 threaded inserts plus integrated pull-back cover Rear panel (full-range models) a 9 8 7 6 3 4 INPUT DSP DISPLAY DIGITAL SIGNAL PROCESSING MASTER VOL SIG MIC 1 OFF MAX MIC/LINE SIG HI-Z SIG SIG/LIMITER POWER 2 OFF MAX HI-Z/LINE 3 OFF STEREO MAX MIX OUT b c d 5 e 3 INPUT1 Level control for the LINE/MIC INPUT 1. INPUT Balanced input for sources such as mixing consoles, instruments, or microphones. Connections can be made via a 1/4-inch TRS or XLR connector. 4 INPUT2 Level control for the Hl-Z/LINE INPUT 2. INPUT Balanced input for sources such as mixing consoles, instruments, or microphones. Connections can be made using a 1/4-inch TRS or XLR connector. 5 STEREO LEVEL Line input level control for STEREO. 6 INPUT LEVEL Level control of the individual input. 7 Hl-Z signal light When sound from a guitar is input, the system setting changes to Hl-Z sensitivity and the signal light turns on. 8 MIC signal light When sound from a microphone is input, the light turns on when the system setting changes to MIC sensitivity. 9 SIG single channel signal light When there is a signal, the signal light turns on. a LCD DSP control and monitoring interface. b MASTER VOL Total volume adjustment range: -60 dB – +10 dB. DSP Scroll through the menus and choose from the options. Press the MASTER VOL knob to select an item on a menu. c SIG/LIMITER signal light Lights up green when there is a signal, and red when the amplifier starts to compress. d POWER indicators Llights up when the speaker is turned on. e MIX OUT The XLR output sends mixed input signals to other speakers or subwoofers. INPUT LEVEL controls the level of the signal sent to the MIX OUT. The MASTER VOL or DSP control settings do not affect the mixed output. 2 1 1 AC INPUT Connect the power cord to AC IN and then to the power outlet. 2 POWER AC switch for turning the power on or off. When POWER is turned ON, the POWER LED and the LCD screen both light up. 2 En
Page number 3
English Français Deutsch Italiano Nederlands Español Rear panel (subwoofer model) 4 3 Installation and connections Important notes on installation The sound produced by the speaker is subtly influenced by the conditions of the room you use it in. Carefully consider the installation location before 7 setting up the speaker to ensure the best possible conditions. 6 AoflpthheaTshpeetaakCero(ripnocrlautdioinngwbiulltnnoottbleimliiatebdletofolrosasnyofdbaumsaingeesssaoripspinogrtufrnoimtieuss),e 5 regardless of the installation method used. a Be sure to use the handles on the top or the sides of the speaker when 8 moving and installing it. 9 CAUTION • To help proper cooling, please make sure enough space is kept between each speaker and nearby walls or other components (minimum 30 cm or more above, behind, and to the sides of each speaker). Leaving insufficient space may cause the temperature inside the speaker to rise, leading to malfunction or permanent damage. • Use of this product while it is stacked is prohibited. 1 2 1 AC INPUT The AC connection is established via the IEC connector. The IEC connector is compatible with a lockout power cord (not included). 2 POWER AC switch for turning the power on or off. When POWER is turned on, the LED lights up. 3 LINK The XLR output sends mixed input signals to other speakers or subwoofers. VOLUME (input level) controls the level of signal sent to LINK. The MASTER VOL and DSP control settings do not affect the LINK signal. 4 INPUT LEFT (mono)/RIGHT 5 POWER indicators The POWER LED lights up when the speaker is turned on. 6 SIG/LIMITER signal light Lights up green when there is a signal, and red when the amplifier starts to compress. 7 3DSP PRESET MODES BOOST/EXTENDED LF/NORMAL 8 LPF 80 Hz/100 Hz/120 Hz 9 POLARITY REVERSE/NORMAL a VOLUME Level control of an input signal. Installation using a speaker pole XPRS82/XPRS102/XPRS122/XPRS152 The full-range models of the XPRS2 Series have a 35-mm-diameter pole socket on the bottom surface. The subwoofer model of the XPRS2 Series have an M20 screw-in pole socket on the top surface in which the pole can be secured firmly. The combinations shown in the following diagrams are recommended for the XPRS2 Series. Using a different combination may result in the speakers toppling over and possibly causing damage or injury. To use a speaker pole, check the cautions below and perform the installation safely. CAUTION • At least two people should lift each speaker together to install it. Be sure to give enough consideration to safety when performing the work. • Use a 35-mm-diameter, one-side M20 screw-in speaker pole. Use a commercially-available product with a length of 900 mm or less. AlphaTheta Corporation will not be liable for any damages (including but not limited to loss of business opportunities) arising from the use of a speaker pole other than the type specified. • Install the subwoofer in a stable location and secure the speaker pole firmly. • Ensure there is no danger of speakers toppling over. • Cables should be taped or tied together with suitable tape or cable ties to avoid the danger of tripping on the cables and causing the speakers to topple over. Pole socket Front 35-mm-diameter pole socket M20 screw-in pole socket Installation using a speaker pole XPRS82, XPRS102, XPRS122 Português Русский 简体中文 XPRS1152ST, XPRS1182ST En 3
