Page number 10
Starting the system 4 Press the [ f ] button to play the track. ! When this button is pressed again during playback, playback pauses. Starting this unit 1 Connect this unit to your computer via a USB cable. MASTER OUT1 (TRS) MASTER OUT2 MIC VOL INPUT SELECT VOL AUX IN R LR L MIC AUX R L ON OFF USB 2 Boot up the connected computer. 3 Slide this unit’s [ON/OFF] switch to the [ON] position. VOL INPUT SELECT VOL AUX IN MIC AUX R L ON OFF USB Turn on the power of this unit. ! The message [ Installing device driver software ] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer. Wait a while until the message [ Your devices are ready for use ] appears. 4 Turn on the connected microphone and external equipment. Launching TRAKTOR LE 2 When this unit has just started, wait for the illumination to stop before launching TRAKTOR LE 2. The [ Audio Setup ] and other settings must be made when using TRAKTOR LE 2 with this unit connected. For details, see Initial settings on page 5. For Windows From the Windows [Start] menu, open [All Programs] > [Native Instruments] > [Traktor 2], then click the [Traktor 2] icon. For Mac OS X In Finder, open the [Application] folder, next open [Native Instruments] > [Traktor 2], then double-click the [Traktor] icon. Loading tracks and playing them 1 Turn the rotary selector while pressing the [SHIFT] button to select a folder or item. ! When a folder or item with the [+] mark is selected and the rotary selector is pressed while pressing the [ SHIFT ] button, that folder or item is opened or closed. 2 Release the [SHIFT] button then turn the rotary selector to select the track. 3 Press the [LOAD] button to load the selected track onto the deck. Outputting sound ! Set the volume of the power amplifiers connected to the [ MASTER OUT 1 ] and [ MASTER OUT 2 ] terminals to an appropriate level. Note that if the volume is set too high, the output sound could be very loud. 1 Operate the [GAIN] control and the channel faders to adjust the audio level output from the respective decks. 2 Operate the crossfader to switch the deck whose sound is output from the speakers. — Left edge: Sound is output from deck [ A ] or [ C ]. — Center: The sound of all the decks is mixed and output. — Right edge: Sound is output from deck [ B ] or [ D ]. 3 Turn the [MASTER VOL] control to adjust the audio level of the speakers. Monitoring sound with headphones 1 Connect headphones to the [PHONES] terminal. 2 Press the headphones [CUE] button for the deck you want to monitor. 3 Turn the [HEADPHONES MIX] control. — Turn counterclockwise: The sound of the deck for which the headphones [ CUE ] button is pressed becomes relatively louder. — Center position: The sound of the deck for which the headphones [ CUE ] button is pressed and the [ MASTER OUT 1 , MASTER OUT 2 ] sound have the same volume. — When turned clockwise: The volume of [ MASTER OUT 1 ] and [ MASTER OUT 2 ] become relatively louder. 4 Turn the [HEADPHONES VOL] control. The sound of the deck for which the headphones [ CUE ] button is pressed is output from the headphones. ! When the headphones [ CUE ] button is pressed again, monitoring is canceled. Quitting the system 1 Quit TRAKTOR LE 2. 2 Slide this unit’s [ON/OFF] switch to the [OFF] position. 3 Disconnect the USB cable from your computer. 4 Turn off the connected microphone and external equipment. 10 En
Page number 11
English Additional information Specifications General – Main Unit Power supply.DC 5 V Power consumption. 500 mA Main unit weight.2.9 kg (6.4 lb) Max. dimensions. 554.8 mm (W) × 103.2 mm (H) × 279.8 mm (D) (21.8 in. (W) × 4.1 in. (H) × 11 in. (D)) Tolerable operating temperature. +5 °C to +35 °C (+41 °F to +95 °F) Tolerable operating humidity. 5 % to 85 % (no condensation) — For improvement purposes, specifications and design of this unit and the included software are subject to change without notice. En 11
