Page number 4
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. D8-10-1-2_A1_En For other areas Information to User Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. D8-10-2_A1_En FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product Name: DJ controller Model Number: DDJ-SR Responsible Party Name: PIONEER ELECTRONICS (USA) INC. SERVICE SUPPORT DIVISION Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A. Phone: 1-800-421-1404 URL: http://www.pioneerelectronics.com D8-10-4*_C1_En NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. D8-10-1-2_A1_En 4 En
Page number 5
English Before start How to read this manual Thank you for buying this Pioneer product. Be sure to read both this leaflet and the operating instructions! Both documents include important information that you must understand before using this product. After you have finished reading the instructions, put them away in a safe place for future reference. — For instructions on acquiring the operating instructions, see Acquiring the manual (p. 14). In this manual, names of screens and menus displayed on the prod- uct and on the computer screen, as well as names of buttons and terminals, etc., are indicated within brackets. (e.g.: [ CUE ] button, [ Files ] panel, [ MIC ] terminal) Please note that the screens and specifications of the software described in this manual as well as the external appearance and specifications of the hardware are currently under development and may differ from the final specifications. Please note that depending on the operating system version, web browser settings, etc., operation may differ from the procedures described in this manual. What’s in the box CD-ROM (Installation Disc) USB cable Warranty (for some regions) 1 Read Before Use (Important)/Quick Start Guide (this document) 1 The included warranty is for the European region. For the North American region, the corresponding information is provided on the last page of both the English and French versions of the “Read Before Use (Important)/Quick Start Guide”. For the Japanese region, the corresponding information is provided on the last page of the Japanese version of the “Read Before Use (Important)/Quick Start Guide”. Installing the software Before installing the software For the latest version of the Serato DJ software, access Serato.com and download the software from there. For details, refer to Installation Procedure (Windows) or Installation procedure (Mac OS X) . The user is responsible for preparing the computer, network devices and other elements of the Internet usage environment required for a connection to the Internet. About the driver software (Windows) This driver software is an exclusive ASIO driver for outputting audio signals from the computer. There is no need to install the driver software when using Mac OS X. Checking the latest information on the driver software For detailed information on this unit’s designated driver software, see the Pioneer DJ support site below. http://pioneerdj.com/support/ About the Serato DJ software Serato DJ is a DJ software application by Serato. DJ performances are possible by connecting the computer on which this software is installed to this unit. Minimum operating environment Supported operating systems Mac OS X: 10.8, 10.7 and 10.6 Windows: Windows 7 Others Optical drive USB port Display resolution Internet connection Optical disc drive on which the CD-ROM can be read A USB 2.0 port is required to connect the computer with this unit. Resolution of 1 280 x 720 or greater An Internet connection is required for registering the “Serato.com” user account and downloading the software. For the latest information on the required operating environment and compat- ibility as well as to acquire the latest operating system, refer to “ Software Info ” under “ DDJ-SR ” on the Pioneer DJ support site below. http://pioneerdj.com/support/ Operating System support assumes you are using the latest point release for that version. Operation is not guaranteed on all computers, even if all the required operating environment conditions indicated here are fulfilled. Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not provide sufficient processing capabilities. For notebook comput- ers in particular, make sure the computer is in the proper conditions to provide constant high performance (for example by keeping the AC power connected) when using Serato DJ. Use of the Internet requires a separate contract with a provider offering Internet services and payment of provider fees. About the installation procedure The installation procedure depends on the operating system (OS) on the computer you are using. For Windows After installing the driver software, install the Serato DJ software. For Mac OS X Only install the Serato DJ software. Installation Procedure (Windows) Do not connect this unit and the computer until installation is completed. Log on as the user which was set as the computer’s administrator before installing. If any other programs are running on the computer, quit them. 1 Insert the CD-ROM into the computer’s optical drive. The CD-ROM menu is displayed. If the CD-ROM menu does not appear when the CD-ROM is inserted, open the optical drive from [ Computer (or My Computer )] in the [ Start ] menu, then double-click the [ CD_menu.exe ] icon. 2 When the CD-ROM menu appears, select [Install Driver Software (Pioneer_DDJ_SR_Driver_x.xxx.exe)], then click [Start]. To close the CD-ROM menu, click [ Exit ]. En 5
