Page number 8
Connections Be sure the power is off when connecting equipment and changing connections. Be sure to use the USB cable included with this product. Refer to the operating instructions for the component to be connected. Connecting with a computer ! The iPhone/iPad connection has priority, so do not connect an iPhone/iPad when using a computer. ! VIRTUAL DJ LE for DDJ-WEGO2 is customized to output the audio only from the unit not from the computer. Please connect headphones, an amplifier or powered speakers as shown in the figure below to hear the output sound. Audio output from your computer will be available if a paid upgrade to VIRTUALDJ PRO FULL is completed. With this unit, the power is supplied by USB bus power. The unit can be used simply by connecting it to a computer using the USB cable. ! Connect this unit and the computer directly using the included USB cable. ! Connect the computer to which this unit is to be connected to an AC power supply. ! A USB hub cannot be used. ! In cases like the ones below, the power may be insufficient and this unit may not operate on USB bus power. — When the computer’s USB power supply capacity is insufficient. — When other USB devices are connected to the computer. — When headphones with an impedance of less than 32 W are connected. — When headphones are simultaneously connected to the stereo phone jack and the stereo mini-phone jack. — When a monaural jack is connected to the [ PHONES ] terminal. ON OFF Headphones cord USB cable To USB port DJ software Computer USB To headphones For checking the output sound Headphones Connecting with an iPhone/iPad 4 Connect with the triangle mark at the top. 1 23 MIC Microphone cable MASTER OUT R R L L To microphone To audio input terminals L Audio cable R L R Audio input For audio input For audio output Microphone Component, amplifier, powered speaker, etc. iPhone/iPad connection cable (Lightning) DJ software iPhone/iPad iPhone/iPad stand 56 7 ON OFF Headphones cord MIC Microphone cable MASTER OUT R R L L USB cable For power supply USB mobile battery/ USB power adapter To headphones For checking the output sound Headphones To microphone To audio input terminals L Audio cable R L R Audio input For audio input For audio output Microphone Component, amplifier, powered speaker, etc. ! An iPhone/iPad cannot be charged with the iPhone/iPad connection cable (Lightning). 8 En
Page number 9
Connections 1 USB terminal When using a computer ! Connect this unit and the computer directly using the included USB cable. ! A USB hub cannot be used. When using an iPhone/iPad ! Connect this unit and a USB mobile battery or USB power adapter using a USB cable. The USB power adapter must have a power supply capacity of DC 5 V/500 mA or greater. Note that depending on the capacity and charging status of the product being used, operation may be unstable. 2 ON/OFF switch Turns this unit’s power on and off. 3 PHONES terminals Connect headphones here. Both stereo phone plugs ( Ø 6.3 mm) and stereo mini phone plugs ( Ø 3.5 mm) can be used. ! Connect headphones with an impedance of 32 W or more. Headphones with an impedance of less than 32 W are not supported. ! Do not connect headphones simultaneously to the stereo phone jack and the stereo mini-phone jack. 4 iPhone/iPad terminal Connect this unit with the iPhone/iPad using the iPhone/iPad con- nection cable (Lightning). 5 MIC jack Connects a microphone here. ! Only the volume of the microphone’s sound can be adjusted. 6 Kensington security slot 7 MASTER OUT terminals Connect powered speakers, etc., here. En 9
