Installation and connections How to install A speaker’s playback sound is delicately influenced by conditions in the listening room. To produce optimum listening conditions, take due consideration of the conditions of your installation location before beginning actual installation. • Place the speakers at ear level. • For a natural stereo effect, the right and left speakers should be installed in symmetrical and equidistant positions from the listening position. • The speakers should ideally be placed at an angle of 30° to the left and right (for a total of 60°) from the listening position, and facing inward. 60 ° • To prevent sliding, apply the supplied cushions to the bottom of the speakers. WARNING Store small parts out of the reach of children and infants. If accidentally swallowed, contact a doctor immediately. D41-6-4_A1_En VENTILATION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 15 cm at top, 15 cm at rear, and 15 cm at each side). WARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed. D3-4-2-1-7b*_A1_En Connections • Disconnect the power cord before making or changing connections. • Read the instruction manuals for the devices you are going to connect with the speakers. • Connect the power cord after all the connections are complete. • Use the supplied power cord. • The input signals to the RCA, STEREO MINI and TRS input terminals are mixed, so please beware of the volume level. Connecting cords Connect the supplied speaker cord to the speakers. 1 Strip about 1 cm of the head of the supplied speaker cord and twist and remove the exposed insulator. After removing the insulator, thoroughly twist the core wires. Black - Red + The cord with the red line 2 Connect the supplied speaker cord to the speaker terminals on the LEFT and RIGHT sides. 3 Insert the core wires into the terminals while pressing the claw on the speaker terminal. Connect the speaker cord with the red line into the + terminal side (red) and the speaker cord without the red line into the - terminal side (black). 4
Download PDF file
Table of contents