Rear panel (subwoofer model) 4 3 DSP control With the integrated DSP control menu, you can choose from multiple DSP and system settings on the speaker. To access the DSP control menu, follow the steps below. 1. Press the MASTER VOL knob and the DSP control menu will appear. 7 6 5 a 8 9 2. Use the MASTER VOL knob to scroll through the menu items. 3. Press the MASTER VOL knob to select the menu item you want to modify. The menu item you chose will open on the right side of the DSP menu. 4. Use the MASTER VOL knob to scroll through the menu items. 5. Press the MASTER VOL knob to select a setting. The setting will be saved and you will return to the level above in the menu. XPRS122 1 2 1 AC INPUT The AC connection is established via the IEC connector. The IEC connector is compatible with a lockout power cord (not included). 2 POWER AC switch for turning the power on or off. When POWER is turned on, the LED lights up. 3 LINK The XLR output sends mixed input signals to other speakers or subwoofers. VOLUME (input level) controls the level of signal sent to LINK. The MASTER VOL and DSP control settings do not affect the LINK signal. 4 INPUT LEFT (mono)/RIGHT 5 POWER indicators The POWER LED lights up when the speaker is turned on. 6 SIG/LIMITER signal light Lights up green when there is a signal, and red when the amplifier starts to compress. 7 3DSP PRESET MODES BOOST/EXTENDED LF/NORMAL 8 LPF 80 Hz/100 Hz/120 Hz 9 POLARITY REVERSE/NORMAL a VOLUME Level control of an input signal. 6. Repeat steps 2 through 5 to modify other DSP and system settings. 7. Select EXIT to return to the main screen. Full-range speaker DSP control menu Full-range speaker DSP control menus are included on the XPRS82, XPRS102, XPRS122 and XPRS152 units. EXIT menu item Use the EXIT menu item to return to the home screen. NOTE After a minute of menu inactivity, the display turns off but the speaker continues working as normal.
Download PDF file
Table of contents