Page number 6
Connecting the input/output terminals Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Connect the power cord after all the connections between devices have been completed. Be sure to use the power cord, AC adapter and USB cable included with this product. Refer to the operating instructions for the component to be connected. Power to this unit is supplied by the AC adapter or by USB bus power. This unit can be used by connecting it to a computer using a USB cable, even without connecting the AC adapter. ! Connect this unit and the computer directly using the included USB cable. ! Do not connect via a USB hub. ! Connect the computer to which this unit is to be connected to an AC power supply. ! The brightness of the buttons that light is dimmer when using on USB bus power. ! When running on USB bus power, the unit may not operate in the following cases: — When the power supply capacity of the computer’s USB port is insufficient. — When other USB devices are connected to the computer. — When headphones with an impedance of less than 32 W are connected. — When a monaural jack is connected to the [ PHONES ] terminal. ! This unit may restart if the AC adapter or USB cable is disconnected during operation. Example of connections To connect to the DJ mixer’s [ MASTER OUT ] terminals To power outlet To [ MASTER OUT ] terminal [ SIGNAL LEVEL ] switch [ +4 dB ] or [ +0 dB ] DJ player Computer DJ Mixer DJ player Powered speakers, etc. To audio input terminals Headphones RL RL To connect to the DJ controller’s [ MASTER OUT ] terminals To power outlet To [ MASTER OUT ] terminal Computer DJ controller Powered speakers, etc. [ SIGNAL LEVEL ] switch To audio input terminals Headphones RL RL 6 En
Page number 7
Before start To connect to the [ SEND ] and [ RETURN ] terminals on the DJ mixer To power outlet DJ Mixer DJ player [ SIGNAL LEVEL ] switch Powered speakers, etc. DJ player Computer To [ RETURN ] terminal To [ SEND ] terminal RL RL Headphones When this unit is connected to your computer and you are using it as a sound card/USB audio interface To [ MASTER OUT ] terminal [ SIGNAL LEVEL ] switch Set the switch so that the signal level is suitable for the devices connected to this unit. Powered speakers, etc. 10 10 0 9 9 0 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 0 0 A B C DJ system Computer RL RL To audio input terminals Headphones USB audio out USB audio in When this unit is connected to your computer with the RMX-500 Plug-in application installed and you are using it as a plug-in controller When this unit detects the RMX-500 Plug-in application, plug-in controller mode is operated. Effects processing is not carried out on this product in such cases. Computer [ SIGNAL LEVEL ] switch Set the switch so that the signal level is suitable for the devices connected to this unit. Plug-in control signal En 7
