DSP CONTROL This unit has a function for adjusting the frequency characteristics in accordance with the installation location or environment. Carry out the adjustment using a combination of the two dials on the rear panel. At the time of shipment from the factory it is set so that flat properties can be obtained in an anechoic chamber, so perform the adjustment to suit the installation environment. LOW EQ Use this for adjusting the bass, in accordance with the installation location and purpose of use. • L1: ROOM 1 Tone quality with bass minimized. This is effective when installed near walls, etc., and the volume of the bass is too loud, or when you do not want the bass reverberating at night time. • L2: FLAT Flat frequency characteristics that faithfully reproduces the input sound. • L3: ROOM 2 Tone quality with high bass volume. This is effective when the reverberation in a room is too small and the bass is insufficient. • L4: CLUB BASS Bass with extra punch, for a club-like sound. This is effective when the bass is insufficient. HIGH EQ Use this for adjusting the treble, in accordance with the installation location and purpose of use. • H1: ROOM 1 Tone quality with treble minimized a certain amount. This is effective when used in a room where the volume of the treble is too loud during a live event. • H2: FLAT Flat frequency characteristics that faithfully reproduces the input sound. • H3: ROOM 2 Sound with high treble volume with the image of bright wide spaces. This is effective when the treble is insufficient. • H4: BRIGHT TREBLE The sound of the musical instruments can be clearly heard. For example the outlines of the sound of guitars, cymbals, trumpets, etc., are clear. Installation and Connections How to Install A speaker’s playback sound is delicately influenced by conditions in the listening room. To produce optimum listening conditions, take due consideration of the conditions of your installation location before beginning actual installation. • Place the speakers at ear level. • Speakers should ideally be located at 30 ° angles from the listening position (together forming a total 60 ° angle), and rotated inward to face the listening position. 50 °~ 60 ° • For a natural stereo effect, the right and left speakers should be installed in symmetrical and equidistant positions from the listening position. • To prevent sliding, apply the furnished cushions to the bottom of the main unit. WARNING Store small parts out of the reach of children and infants. If accidentally swallowed, contact a doctor immediately. D41-6-4_A1_En 4 VENTILATION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 15 cm at top, 15 cm at rear, and 15 cm at each side). WARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed. D3-4-2-1-7b*_A1_En
Download PDF file
Table of contents