Connections ! Connect the power cord to a power outlet after all the connections are completed. ! Turn off this unit and disconnect the power cord from the power outlet before connecting components or changing the connections. ! Refer to the operating instructions for the components to be connected. ! Be sure to use the supplied power cord. ! Connect this unit and the computer directly using the included USB cable. Connecting to the input/output terminals Rear panel, front panel Headphones Power amplifier, powered speakers, Power amplifier, powered speakers, etc. etc. Computer DJ software RL LR Portable audio device To power outlet DJ player Power cord Microphone (included) AC adapter (included) RL 1 2 34 5 Front panel Rear panel 1 PHONES terminals Connect headphones. Stereo phone plugs (ø 6.3 mm) and stereo mini phone plugs (ø 3.5 mm) can be used. ! Do not use the two output terminals (one for a stereo phone jack and one for a mini-phone jack) simultaneously. If a cable is connected to or disconnected from one of the terminals while another terminal is in use, the volume for the terminal in use may increase or decrease unintentionally. 2 Kensington security slot 3 MASTER1 terminals Connect to a power amplifier, powered speakers, etc. Be sure to use these as balanced outputs. ! Be careful not to accidentally insert the power cord of another unit. ! Do not connect a terminal that can supply phantom power. 4 MASTER2 terminals Connect to a power amplifier, powered speakers, etc. 5 USB terminal Connect to a computer. ! A USB hub cannot be used. ! Connect this unit and the computer directly using the included USB cable. ! For connecting to XDJ-RR, be sure to use the USB cable supplied with the unit for optimum performance. 6 AUX terminal Connect a DJ player or a line level output component. 7 MIC terminal Connect a microphone. 6 78 9 8 DC IN Connect the AC adapter. ! Connect the power cord to a power outlet after all the connec- tions are completed. ! Be sure to use the supplied power cord. 9 Cord hook Hooking the AC adapter power cord onto the cord hook Fasten the AC adapter power cord into place by hooking it onto the cord hook. This prevents the power cord from being accidentally pulled and causing the plug to get disconnected from the terminal. ! Do not fasten with the base of the AC adapter power cord bent. If used continuously under these conditions, the power cord may be damaged, resulting in faulty contact. ! If the AC adapter is disconnected during playback, the sound will be interrupted. 8 En
Download PDF file